NEC Univerge SV8100 Features And Specifications Manual page 423

UNIVERGE SV8100
Program
Program Name
Number
20-14-03 Class of Service Options for
DISA/E&M – Trunk Group
Access
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dialing
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
20-14-07 Class of Service Options for
DISA/E&M – External Paging
20-14-08 Class of Service Options for
DISA/E&M – Direct Trunk Access
20-14-09 Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN
T-point>
20-14-10 Class of Service Options for
DISA/E&M – Call Forward Setting
by Remote via DISA
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
21-15-01 Individual Trunk Group Routing
for Extensions
22-01-11 System Options for Incoming
Calls – VRS Waiting Message
Interval Time
SV8100 Features and Specifications Manual
Description/Comments
This option Enables or Disables a
DISA or tie trunk caller ability to
access trunk groups for outside calls
(Service Code 704).
This option Enables or Disables a
DISA or tie trunk caller ability to
use System Speed Dialing.
This option Enables or Disables a
DISA or tie trunk caller ability to dial 0
for the telephone system operator.
This option Enables or Disables a
DISA or tie trunk caller ability to use
the telephone system Internal
Paging.
This option Enables or Disables a
DISA or tie trunk caller ability to use
the telephone system External
Paging.
This option Enables or Disables a
DISA or tie trunk caller ability to use
Direct Trunk Access (Service Code
#9).
This option Enables or Disables a tie
trunk caller ability to use Forced
Trunk Disconnect (Service Code 3).
This option is not available to DISA
callers.
Enable or Disable a DISA caller
ability to use the Call Forward service
codes (Programs 11-11-01 ~ 11-11-
05).
In an extension Class of Service,
enable (1) or disable (0) a DISA or tie
trunk user from using the Barge-In
feature.
Designate the trunk route accessed
when a user dials the Alternate Trunk
Route Access Code. Refer to Trunk
Group Routing to set up outbound
routing.
Setup the duration time between
announcing the VRS Waiting
Message for Auto – Attendant &
Queuing. The message is repeatedly
sent out in the specified time.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 =Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~100
(0 = No Setting)
(default = 0)
0~64800 (seconds)
(default = 20 seconds)
Issue 1.0
Level
2 3
2 - 399