NEC Univerge SV8100 Features And Specifications Manual page 71

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
10-03-03 ETU Setup (LCA PKG Setup) –
Transmit Gain Level (S-Level)
10-03-04 ETU Setup (LCA PKG Setup) –
Receive Gain Level (R-Level)
15-03-01 Single Line Telephone Basic Data
Setup – SLT Signaling Type
15-03-04 Single Line Telephone Basic Data
Setup – Flashing
Operation
Depends on the connected ancillary device.
SV8100 Features and Specifications Manual
Description/Comments
Customize the transmit and receive
levels of the CODEC Gain Types for
500/2500 type single line
telephones.
Customize the transmit and receive
levels of the CODEC Gain Types for
500/2500 type single line
telephones.
Use this option to tell the system the
type of dialing the connected
telephone uses.
Enables/Disables Flash for single
line (500/2500 type) telephones.
Assigned Data
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
0 = DP
1 = DTMF
(default = 1)
0 = No
1 = Yes
(default = 1)
Issue 1.0
Level
1 2 3
2 - 47