NEC Univerge SV8100 Features And Specifications Manual page 272

Issue 1.0
Program
Program Name
Number
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS
Personal Greeting (Message
Greeting)
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
2 - 248
Description/Comments
Turns Off (0) or On (1) the Trunk-to-
Trunk Transfer Restriction. If
enabled, Trunk-to-Trunk Transfer is
not possible.
Turns Off or On an extension user
ability to dial Service Code 616 to
record, listen to or erase the
Personal Greeting Message.
Turns On (1) or Off (0) a multiline
terminal user ability to transfer a call
to a predefined destination (such as
an operator, voice mail, or another
extension) without answering the
call.
Turns On (1) or Off (0) the ability of
an extension in a Department
Group to use the Trunk-to-Trunk
Forwarding service codes.
Allow (0) or Deny (1) answered
Transferred calls from recalling the
originating extension.
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06,
1 = Extended for Program
24-01-07).
Turns Off or On an extension ability
to receive Callbacks.
Allow (0) or Deny (1) an extension
users's ability to set up a tandem/
conference call automatically when
they hang up.
Allow or deny an extension user to
initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
In an extension Class of Service,
turns On (1) or Off (0) the ability to
set and cancel Call Forwarding for a
CAR or Virtual Extension.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Class of Service
Level
2 3