NEC Univerge SV8100 Features And Specifications Manual page 778

Issue 1.0
Program
Program Name
Number
21-05-07 Toll Restriction Class – Permit
Code Table
21-05-08 Toll Restriction Class –
Restriction Table
21-05-09 Toll Restriction Class –
Restriction for Common Speed
Dials
21-05-10 Toll Restriction Class –
Restriction for Group Speed
Dials
21-05-11 Toll Restriction Class – Intercom
Call Restriction
21-05-12 Toll Restriction Class – PBX Call
Restriction
21-05-13 Toll Restriction Class –
Restriction of Tie Line Calls
22-02-01 Incoming Call Trunk Setup
2 - 754
Description/Comments
Set the tables 1~4 when referring
to the table set up by Program
21-06-06.
Set the tables 1~4 when referring
to the table set up by Program
21-06-07.
For the Code Restriction Class
you select, enable (1) or disable
(0) Code Restriction for Common
Speed Dialing numbers.
For the Toll Restriction Class you
select, enable (1) or disable (0)
Code Restriction for Group Speed
Dialing numbers.
For the Toll Restriction Class you
select, enable (1) or disable (0)
Intercom Call Restriction. If
enabled, extensions cannot place
or receive Intercom calls.
If Program 34-01-05 is set to (1),
define the toll restriction settings
for Tie Lines.
Enable (1) or disable (0) toll
restriction for Tie Line calls
(defined in Program 34-08-01).
For each Night Service mode,
enter service type 5 when the
trunk should be a tie trunk.
UNIVERGE SV8100
Assigned Data
1~4 =Table
0 = Disable (None)
Default:
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
1~4 =Table
0 = Disable (None)
Default:
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
0 = Does Not Restrict
1 = Following Restriction
Check
(default =0)
0 = Does Not Restrict
1 = Following Restriction
Check
(default =0)
0 = Disable
1 = Enable
(default = 0)
1~4 =Table
0 = Disable (None)
Default:
1~6, 8~15 = 0
7 = 1
0 = Disable
1 = Enable
(default = 0)
0 = Normal
1 = VRS (second dial
tone if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Multiple Trunk Types
Level
1 2 3