NEC Univerge SV8100 Features And Specifications Manual page 357

UNIVERGE SV8100
Program
Program Name
Number
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
20-13-20 Class of Service Options
(Supplementary Service) –
Account Code/Toll Restriction
Operator Alert (Restricted
Operation Transfer)
20-13-21 Class of Service Options
(Supplementary Service) –
Extension Name
20-13-22 Class of Service Options
(Supplementary Service) – Busy
Status Display (Called Party
Status)
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
20-13-24 Class of Service Options
(Supplementary Service) –
Privacy Release by Pressing
Line Key
20-13-26 Class of Service Options
(Supplementary Service) –
Group Listen
20-13-27 Class of Service Options
(Supplementary Service) – Busy
on Seizing Virtual Extension
20-13-28 Class of Service Options
(Supplementary Service) – Allow
Class of Service to be Changed
20-13-29 Class of Service Options
(Supplementary Service) –
Paging Display
SV8100 Features and Specifications Manual
Description/Comments
In an extension Class of Service,
turns On (1) or Off (0) the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display at
the called extension.
Turns Off or On operator alert when
an extension improperly enters an
Account Code or violates Toll
Restriction.
Turns Off (0) or On (1) an extension
user ability to program the name.
Turns Off or On the ability to display
the detail state of called party.
This applies only to the
multiline terminal.
Select whether an extension should
display the reason a call is being
transferred to their extension (Call
Forward Busy, Call Forward No
Answer, DND).
This only applies to the
multiline terminal.
Turns Off or On a user ability to
press a line key to barge into an
outside call. The Barge-In feature
must be enabled if this option is to
be used.
This applies only to the
multiline terminal.
Turns Off or On an extension ability
to use Group Listen.
This applies only to the
multiline terminal.
If set to 1, a busy extension can be
called, while someone is talking on
a virtual extension key. Program
20-13-06 (Call Waiting) must be set
to off for this option to work.
Turns Off or On the ability of an
extension COS to be changed via
Service Code 677.
Turns Off (0) or On (1) an extension
user ability to display paging
information.
This applies only to the
multiline terminal..
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
1 = On
0 = Off
(default = 1 for COS
01~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 333