NEC Univerge SV8100 Features And Specifications Manual page 436

Issue 1.0
Night Service
One-Touch Calling
Paging, External
Paging, Internal
Programmable Function Keys
Speed Dial – System/Group/Station
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
10-03-01 ETU Setup (DLC PKG Setup) –
Terminal Type (B1)
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
2 - 412
Description/Comments
Use to setup and confirm the Basic
Configuration data for terminal type
(B1).
Set to 1 for a DSS Console to have
one-touch operation. If set to 0, the
user must lift the handset before
pressing a DSS key for the call to
complete.
UNIVERGE SV8100
Assigned Data
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Preselect
1 = One-Touch
(Automatic
Handsfree)
(default = 1)
Direct Station Selection (DSS) Console
Level
1 2 3