NEC Univerge SV8100 Features And Specifications Manual page 442

Issue 1.0
Related Features
Call Arrival (CAR) Keys
Department Calling
Group Call Pickup
Hold
Hotline
Park
Secretary Call Pickup
Secondary Incoming Extension
Transfer
Virtual Extensions
VM8000 InMail
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-25 Service Code Setup (for Service
Access) – Direct Call Pickup -
Own Group
11-12-26 Service Code Setup (for Service
Access) – Call Pickup for
Specified Group
11-12-27 Service Code Setup (for Service
Access) – Call Pickup
2 - 418
Description/Comments
Use to customize the Service
Codes for direct call pickup – own
group.
Use to customize the Service
Codes for call pickup for specified
group.
Use to customize the Service
Codes for call pickup.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 756)
MLT, SLT
(default = 768)
MLT, SLT
#
(default = )
Directed Call Pickup
Level
2 3