NEC Univerge SV8100 Features And Specifications Manual page 945

UNIVERGE SV8100
Program
Program Name
Number
20-01-02 System Options – Text Message
Mode
20-02-07 System Options for Multiline
Telephones – Time and Date
Display Mode
20-06-01 Class of Service for Extensions
20-13-19 Class of Service Options
(Supplementary Service) –
Selectable Display Messaging
(Text Messaging)
20-16-01 Selectable Display Messages
SV8100 Features and Specifications Manual
Description/Comments
Select whether and intercom caller
should hear busy (1) or ring
through (0) for extensions which
have Selectable Display
Messaging set.
Any extension previously set
with Selectable Display
Messaging must cancel the
feature and reactivate for a
change in this option to take
affect.
Set the System Time and Date
display mode. The time that
displays in Selectable Display
Messages follows this setting.
Assign a Class of Service (1~15) to
an extension.
Turns Off (0) or On (1) an
extension user ability to use
Selectable Display Messaging.
Program the Selectable Display
Messages (1~20). Refer to the
chart below for character entry.
Assigned Data
0 = Call mode
1 = No Answer/
Busy mode
(default = 1)
1~8
Type 1 = (12 hour) 10
MAR TUE 3:15PM
Type 2 = (12 hour)
3:15PM MAR 10 TUE
Type 3 = (12 hour) 3-10
TUE 3:15 PM
Type 4 = (12 hour)
3:15PM TUE 10 MAR
Type 5 = (24 hour) 10
MAR TUE 15:15
Type 6 = (24 hour) 15:15
MAR 10 TUE
Type 7 = (24 hour) 3-10
TUE 15:15
Type 8 = (24 hour) 15:15
TUE 10 MAR
(default = 4)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 1 for COS
1~15)
24 characters
Default:
Refer to Table 2-21
Selectable Display
Messaging Defaults on
page 2-919
Issue 1.0
Level
1 2 3
2 - 921