NEC Univerge SV8100 Features And Specifications Manual page 826

Issue 1.0
Program
Program Name
Number
20-03-03 System Options for Single Line
Telephones – SLT DTMF Dial to
Trunk Lines
20-03-04 System Options for Single Line
Telephones – Dial Sending Start
Time for SLT or ARS
20-03-05 System Options for Single Line
Telephones – SLT Operation
Mode
20-03-06 System Options for Single Line
Telephones – Headset Ringing
Start Time (for SLT)
20-03-07 System Options for Single Line
Telephones – Trunk Call Dial
Forced Sending Start Time
(Forced Dial)
20-06-01 Class of Service for Extensions
2 - 802
Description/Comments
Type 0: The system keeps the
digits dialed by the single line
telephone on a trunk in a buffer.
After all the digits are received,
the system sends all the digits
to the trunk. If the time space
between digits is longer than
the time in Item 4, the system
considers all digits received.
Type 1: The system passes the
received digits from the single
line telephone to the trunk
immediately. If the single line
telephone has a Last Number
Dial key without a pause, this
key may not be able to use the
Last Number Dial key with the
Type 1 setting.
When using a third-party external
paging device, set this option to 1.
In addition, set Program 20-03-04
to 1. These programs must be set
for Wireless DECT (SIP) users to
break dial tone on an analog trunk
that is used for paging.
When ARS or an analog extension
user accesses a trunk and dials an
outside call, the system waits this
interval before outdialing the first
digit (0~64800 seconds).
Used to set the operation mode for
SLT terminals.
Define the headset ringing start
time. After this time expires from
the time when a single line
telephone is off-hook, the system
sets the single line telephone to
headset ringing mode.
Used to define the Trunk Call Dial
Forced Sending Start Time
(Forced Dial) for single line
telephones.
Assign a Class of Service (1~15) to
an extension.
UNIVERGE SV8100
Assigned Data
0 = Receive all dialed
data, before sending (All)
1 = Direct through out
(Direct)
(default = 0)
0~64800 (seconds)
(default = 1 second)
0 = Normal Mode
1 = Extended Mode1
2 = Extended Mode2
(default = 0)
0~64800 seconds
(default = 5)
0~64800 seconds
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
(OPX) Off-Premise Extension
Level
1 2 3