NEC Univerge SV8100 Features And Specifications Manual page 648

Issue 1.0
Program
Program Name
Number
84-19-08 SIP Extension CODEC
Information Basic Setup – G.729
Voice Activity Detection Mode
84-19-09 SIP Extension CODEC
Information Basic Setup – G.729
Jitter Buffer (min)
84-19-10 SIP Extension CODEC
Information Basic Setup – G729
Jitter Buffer (average)
84-19-11 SIP Extension CODEC
Information Basic Setup – G729
Jitter Buffer (max)
84-19-17 SIP Extension CODEC
Information Basic Setup – Jitter
Buffer Mode
84-19-18 SIP Extension CODEC
Information Basic Setup – VAD
Threshold
84-19-26 SIP Extension CODEC
Information Basic Setup – TX
Gain
84-19-27 SIP Extension CODEC
Information Basic Setup – RX
Gain
84-19-28 SIP Extension CODEC
Information Basic Setup – Audio
Capability Priority
2 - 624
Description/Comments
Use this program to Enable or
Disable Voice Activity Detection for
G.729.
Use this program to define G.729
Jitter Buffer minimum accepted
value – values are set in ms.
Use this program to define G.729
Jitter Buffer average accepted
value – values are set in ms.
Use this program to define G.729
Jitter Buffer maximum accepted
value – values are set in ms.
Use this program to define the Jitter
Buffer mode – supported Static or
Immediate.
Use this program to define the VAD
Threshold – Values set in db.
Consult the UNIVERGE SV8100
Programming Manual for Threshold
scale to set acceptable values.
Use this program to define to TX
Gain Values – Adjusting this value
increases or decreases volume
levels for the receiving party.
Consult the UNIVERGE SV8100
Programming Manual for Transmit
Gain scale to set acceptable value.
Use this program to define to RX
Gain Values – Adjusting this value
increases or decreases volume
levels for the sending party. Consult
the UNIVERGE SV8100
Programming Manual for Transmit
Gain scale to set acceptable value.
Use this program to define to.
Consult the UNIVERGE SV8100
Programming Manual for Transmit
Gain scale to set acceptable value.
UNIVERGE SV8100
Assigned Data
1
0 = Disabled
1 = Enabled
(default = 0)
0~270 ms
(default = 20 ms)
0~270 ms
(default = 40 ms)
0~270 ms
(default =80 ms)
1 = Static
2 = Adaptive during
Silence
3 = Adaptive
Immediately
(default = 3)
0~30
(default = 20)
0~40 =
(-20dbm ~ +20dbm)
0 =-20 dbm
1 =-19 dbm
:
20 =0 dbm
:
39 =+19 dbm
40 =+20 dbm
(default =20)
0~40 =
(-20dbm ~ +20dbm)
0 =-20 dbm
1 =-19 dbm
:
20 =0 dbm
:
39 =+19 dbm
40 =+20 dbm
(default = 20)
0 = G.711_PT
1 = G.723_PT
2 = G.729_PT
3 = G.722
4 = G.726
5 = Not Used
(default = 0)
IP Single Line Telephone (SIP)
Level
2 3