NEC Univerge SV8100 Features And Specifications Manual page 902

Issue 1.0
Related Features
Automatic Route Selection
Central Office Calls, Placing
Last Number Redial
Save Number Dialed
Single Line Telephones
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
21-08-01 Repeat Dial Setup – Repeat
Redial Count
2 - 878
Description/Comments
Assign a function key for Repeat
Redial (code 29).
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension to use Repeat Redial.
Set how many times Repeat
Redial automatically repeats if the
call does not go through.
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Input Data = 0~15
(16~255 Not Allowed)
(default = 3 for S002)
Repeat Redial
Level
1 2 3