NEC Univerge SV8100 Features And Specifications Manual page 435

UNIVERGE SV8100
When a multiline terminal user is on a call, they can transfer to another station by pressing a
DSS key for that station. It is not necessary to press Transfer to transfer to another station
using a DSS key.
When a multiline terminal user is on a call, they must press Transfer to transfer a call off site with a DSS
key.
Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered
as P in the dial string and causes the system to wait three seconds before sending the rest of
the digits that follow the P (pause). Multiple pauses can be entered.
The @ can be entered in the dial string of a DSS/One Touch button. The @ only applies to
ISDN and Intercom calls. When using the @, the system waits for the destination to answer
(answer supervision), and then sends the rest of the digits.
Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom
calls, or after the @ for ISDN calls.
Default Setting
No DSS Consoles assigned (in Program 30-02-01).
All DSS Console key ranges are ports 1~200.
Once a DSS Console is enabled, the console keys are DSS keys (Program 30-03-01).
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Automatic Call Distribution (ACD)
Call Forwarding
Central Office Calls, Answering
Central Office Calls, Placing
Door Box
SV8100 Features and Specifications Manual
Issue 1.0
2 - 411