Handsfree And Monitor - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Handsfree allows a Multiline Terminal user to process calls using the speaker and microphone in the

telephone instead of the handset. Handsfree is a convenience for workers who do not have a free hand to

pick up the handset. For example, a terminal operator could continue to enter data with both hands while

talking on the telephone.

There are three variations of Handsfree.

The user can press Speaker to place and answer calls instead of using the handset.

Automatic Handsfree

The user can press a trunk line key or virtual extension key without lifting the handset or pressing

the Speaker key. An extension can have Automatic Handsfree for outgoing calls or for both

outgoing calls and incoming calls.

User can place a call without lifting the handset, but must lift the handset to speak.

Handsfree and Monitor are not available for single line telephones.

Prime Line Selection affects how incoming and outgoing calls are handled and thus

determines what happens when the user presses the speaker key.

Monitoring volume may be adjusted using the volume control on the Multiline Terminal.

When a Multiline Terminal user lifts the handset, the monitoring condition is automatically

released, and the Speaker LED goes off.

A Multiline Terminal is considered off-hook by the system when this feature is used.

Default Setting

SV8100 Features and Specifications Manual

Handsfree and Monitor

Show Quick Links

Table of Contents