NEC Univerge SV8100 Features And Specifications Manual page 335

UNIVERGE SV8100
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-09-08 Class of Service Options
(Incoming Call Service) – Calling
Party Information
20-10-01 Class of Service Options
(Answer Service) – Group Call
Pickup (Within Group)
20-10-02 Class of Service Options
(Answer Service) – Group Call
Pickup (Another Group)
SV8100 Features and Specifications Manual
Description/Comments
Turns Off (0) or On (1) the extension
ability to receive a second call from a
DID, DISA, DIL, or tie line caller.
With this option set to 1, the
destination extension must be busy
for a second DNIS caller to ring
through. If the destination
extension does not have a trunk or
CAP key available for the second
call and a previous call is ringing
the extension but has not yet been
answered, the second caller hears
busy regardless of this program
setting.
Turns Off (0) or On (1) the Caller ID
display at an extension.
Define whether an extension displays
the Caller Sub-Address.
Determine whether or not the CHECK
LIST message is displayed to indicate a
missed call.
Turns Off or On an extension ability to
enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
If this option is set to 1, the Incoming
Call Time is displayed on the multiline
terminal LCD while the telephone is
ringing.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call rings
the extension when it is busy.
Turns Off or On and extension ability to
display calling party information on
CCIS calls.
Turns Off or On Group Call Pickup for
calls ringing an extension Pickup Group
as well as ring group calls (Service
#
Code ).
Turns Off or On Group Call Pickup for
calls ringing outside a group (Service
Code 769).
Issue 1.0
Level
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 01~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
2 - 311
2 3