Paper Specifications And Adding Paper; Workflow For Loading Paper And Configuring Paper Sizes And Types - Ricoh SP 277 NwX Operating Instructions Manual

2. Paper Specifications and Adding
Paper
This chapter describes how to load paper and originals and about their specifications.
Workflow for Loading Paper and Configuring
Paper Sizes and Types
This section explains how to load paper and the operations required after loading paper.
After following the procedures below, you can print on the paper that is loaded in the machine.
Load paper into the paper tray.
Specify the paper type and size.
Specify the paper type and size on the printer driver.
For details about the procedures, refer to the next page.
Procedure
For details about supported paper, see page 30 "Supported Paper".
• When loading paper into Tray 1
See page 18 "Loading Paper into Tray 1".
• When loading paper into the bypass tray
See page 23 "Loading Paper into the Bypass Tray".
There are two ways to specify the paper type and size.
• When using Web Image Monitor
See page 27 "Specifying Paper Type and Paper Size Using Web
Image Monitor".
• When using Smart Organizing Monitor
See page 25 "Specifying Paper Type and Paper Size Using Smart
Organizing Monitor".
See page 28 "Specifying Paper Type and Paper Size Using the Printer
Driver".
Reference
DSG260
17