Label Paper; Glossy Paper - Ricoh Aficio SP C811DN Hardware Manual

Label paper

Printer setup
Printer driver setup
Supported paper feeding tray
Duplex printing
Label paper setup
Additional cautions

Glossy paper

Printer setup
Printer driver setup
Supported paper feeding tray
Select [Paper Input] [Paper Type: Bypass Tray]
[Label Paper].
Select [Label Paper] in [PaperType].
Bypass tray
• Make sure paper is not stacked higher than
the paper guides inside the bypass tray.
Not supported
Default: [Labels 1]
If the print quality needs to be improved, select
[Maintenance] [General Settings]
per Setting] [Labels 1] to [Labels 3] to change
the setting value to a different number depending
on the paper thickness that you are using. High
numbered settings allow thicker paper to be used,
but are printed more slowly.
• Print speed is slightly slower than when using
plain paper.
• Shuffle paper before loading the stack onto
the tray, so multiple sheets are not fed in to-
gether.
Select [Paper Input] [Paper Type: XXX] (XXX:
Tray 1 to 5, Bypass Tray)
Select [Glossy Paper] in [Paper Type].
Any input tray can be used.
• Make sure paper is not stacked higher than
the upper limit mark ( ) inside the tray. When
using the bypass tray, make sure paper is not
Paper Recommendations
[Label Pa-
[Glossy Paper].
5
91