Comtech EF Data CDM-710G Installation And Operation Manual page 222

CDM-710G High-Speed Satellite Modem
Remote Control
Command Arguments for
Parameter (Instruction Command or
Type Code and Response to
Qualifier)
Tx Power Level TPL= 5 bytes
Tx Spectrum TSI= 1 byte
Invert
Tx Carrier State TXO= 1 byte
Description of Arguments
Query
Command or Query.
Tx Output power level, where:
s=sign ( + / - )
xx.x = Tx Output power level, +05.0 and –20.0 dBm.
L-Band: -25.0 to –05.0 dBm
70/140 MHz: -20.0 to +00.0 dBm
Note: Beyond –20 dBm is beyond the specification.
Example: TPL = -13.4
Command or Query.
Tx Spectrum Invert selection, where:
0=Normal
1=Tx Spectrum Inverted
Example: TSI=0 (which is normal)
Command or Query.
Tx Carrier State, where:
0=OFF due to front panel or remote control command
1=ON
Example: TXO=1 (Tx Carrier ON)
TPL=
TPL?
TPL*
TPL#
TSI=
TSI?
TSI*
TSI#
TXO=
TXO?
TXO*
TXO#
A–32
MN-CDM710G
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
TPL? TPL=sxx.x
TSI? TSI=x
TXO? TXO=x
Revision 1