Table of Contents
Advertisement
CDM-710G High-Speed Satellite Modem
Remote Control
Command
Arguments for
Parameter
(Instruction
Command or
Type
Code and
Response to
Qualifier)
Equipment ID
N/A
23 bytes
Eb/No
EBA=
4 bytes
AlarmPoint
Rx Eb/No
N/A
4 bytes
Description of Arguments
Query
Query Only.
Unit returns equipment identification and configuration, where:
aaa = defines the modulator model number (71G)
b = Modulator configuration:
0 = None, 1=70/140 Mhz, 2=L-Band
c = Tx Symbol Rate S/W option: 0 = 15.0 Msps,
1 = 22.5 Msps, 2 = 30.0 Msps,
3 = 37.5 Msps (S1 and DSNG only),
4 = 45.0 Msps
d = S/W option Tx 8PSK: 0=Not installed, 1=Installed
e = Reserved
f = S/W option Tx 16APSK: 0=Not installed, 1=Installed
g = S/W option Tx 32APSK: 0=Not installed, 1=Installed
h = Reserved
i = Reserved
j = S/W option Tx DVB-S2: 0=Not installed, 1=Installed
k = Demodulator configuration:
0=None, 1=70/140 Mhz, 2=L-Band
l = Rx Symbol Rate S/W option: 0=15.0 Msps,
1 = 22.5 Msps, 2 = 30.0 Msps,
3 = 37.5 Msps (S1 & DSNG only),
4 = 45.0 Msps
m = S/W option Rx 8PSK: 0=Not installed, 1=Installed
n = Reserved
o = S/W option Rx 16APSK: 0=Not installed, 1=Installed
p = S/W option Rx 32APSK: 0=Not installed, 1=Installed
q = Reserved
r = Reserved
s = S/W option Rx DVB-S2: 0=Not installed, 1=Installed
t = Interface slot #1: 0 = None, 1 = Reserved, 2 = Gigabit Ethernet,
Interface, 3 = HSSI, 4 = E3T3STS1
u = Interface slot #2: 0 = None, 1 = Reserved, 2 = Gigabit Ethernet,
Interface, 3 = HSSI, 4 = E3T3STS1
Command or Query.
Eb/No alarm point in dB, with a range between 0.1 and 16 dB.
Resolution=0.1 dB
Example: EBA=12.3
Query only.
Unit returns the value of Eb/No, between 0 and 16 dB, resolution 0.1 dB.
Returns 99.9 if demod is unlocked.
Example: EBN=12.3 (which is Eb/No = 12.3 dB)
For values greater than 16.0 dB, the reply will be: EBN=+016
EID?
EID*
EID#
EBA=
EBA?
EBA*
EBA#
EBN?
EBN*
EBN#
A–18
MN-CDM710G
Query
Response to
(Instruction
Response to Query
Command
Code and
Qualifier)
EID?
EID=
aaabcdefghijklmnopqrstu
Note:
Unit returns 'Not
Installed' for Rx options if
unit is modulator only.
Unit returns 'Not
Installed' for Tx options if
unit is demodulator only.
EBA?
EBA=xx.x
(see description of
arguments)
EBN?
EBN=xxxx
Revision 1
Advertisement
Table of Contents
