Comtech EF Data CDM-710G Installation And Operation Manual page 119

High-speed satellite modem
Table of Contents

Advertisement

CDM-710G High-Speed Satellite Modem
Front Panel Operation
Menu Mnemonic
+1.5V PSU Demodulator Card
FPGA Load Demodulator Card
Demod Unlocked
FPGA Temp Demodulator Card
BER limit Exceeded
AGC Level Out of Range
Eb/No limit exceeded
Demodulator Synth 1 PLL
Demodulator Synth 2 PLL
Demodulator SERDES Dmd->Framer
Demodulator SERDES Framer > FEC1
Demodulator SERDES Framer > FEC2
FAST option not installed
Rx DCM Unlocked
Intf1 Rx Buffer Underflow
Intff Rx Buffer Overflow
Intf2 Rx Buffer Underflow
Intf2Rx Buffer Overflow
SERDES Par Framer -> Intf1
SERDES Par Framer ->Intf2
Rx Clock Source Interface 1
Rx Clock Source Interface 2
Intf1 Rx AIS Slot 1 Port1
Intf2 RXAIS Slip Slot 2
Intf1 EXT Clock Slot1
Intf2 Clock Slot2
If Stored Events:
Clear All Stored Events
No
Yes
When In Local mode, use the ◄ ► arrow keys to select No to retain, or Yes to clear the buffer of
all stored events, then press
Note: When the unit is in Remote mode, and the user attempts to select an option, the following
message is displayed (follow the prompt as shown):
THIS UNIT IS CURRENTLY
IN REMOTE MODE!!
DO YOU WANT IN LOCAL
MODE? ENT=Yes CLR=No
Demodulator Faults / Alarms
1.5 Vdc regulator exceeds +/- 5%
Demod FPGA not loading
Demodulator is not locked
Demod FPGA outside temperature range
Bit error rate limit exceeded
AGC level is out of range
EB/No limit has been exceeded
Demodulator Synth 1 PLL fault
Demodulator Synth 2 PLL fault
Demodulator SERDES fault
Demodulator SERDES fault
Demodulator SERDES fault
FAST option for selected feature has not been installed
Demod Digital Clock Manager unlocked
Rx buffer has underrun Slot 1
Rx buffer has overflowed Slot 1
Rx buffer has underrun Slot 2
Rx buffer has overflowed Slot 2
SERDES parity error detected on framer FPGA interface 1
SERDES parity error detected on framer FPGA interface 2
Rx Clock Source fault Interface 1
Rx Clock Source fault Interface 2
RX AIS slot1
RX AIS slot2
EXT Clock Slot1
EXT Clock Slot2
Clear-All is selected:
(
E)
.
ENTER
6–43
MN-CDM710G
Description
Revision 1

Advertisement

Table of Contents
loading

Table of Contents