(Config:) Intfc2 Gigabit Ethernet Swop (Switch Operation); Swop (Switch Operation) - Comtech EF Data CDM-710G Installation And Operation Manual

High-speed satellite modem
Table of Contents

Advertisement

CDM-710G High-Speed Satellite Modem
Front Panel Operation
Category
Message
Management
Mng Good Octets (In)
Port Statistics
Mng Bad Octets (In)
Mng Unicast (In)
Mng Broadcast (In)
Mng Multicast (In)
Mng Oversize (In)
Mng Jabber (In)
Mng Rx Err (In)
Mng FCS Err (In)
Mng Pause (In)
Mng Undersize (In)
Mng Fragments (In)
Mng Octets (Out)
Mng Unicast (Out)
Mng Broadcast (Out)
Mng Multicast (Out)
(CONFIG:) Intfc2 Gigabit Ethernet
Intfc2 SWOP:
AutoCx
Select AutoCx or Learning using the
If Intfc2 SWOP:
Intfc2 Auto Crossover:
Enable Disable
Select Enable or Disable using the
Ethernet Interface automatically detects the type of connection and configures the interface
appropriately as straight-through (MDI) or crossover (MDIX). If Disabled, the Gigabit Ethernet
port is configured as straight-through (MDI).
GBEI Statistics Summary
The sum of lengths of all good Ethernet frames received from the local GBEI management processor.
The sum of lengths of all bad Ethernet frames received from local GBEI management processor.
The sum of good frames received from the local GBEI management processor that have a unicast
destination MAC address.
The sum of good frames received from the local GBEI management processor that have a broadcast
destination MAC address.
The sum of good frames received from the local GBEI management processor that have a multicast
destination MAC address.
Total frames received form the local GBEI management processor with a length greater than the
maximum size of octets but with a valid FCS.
Total frames received form the local GBEI management processor with a length greater than the
maximum size of octets but with an invalid FCS.
Total frames received from the local GBEI management processor for that an error was detected by its
physical interface.
Total frames received from the local GBEI management processor with a CRC error that was not
counted in the Fragments or Rx Err totals.
The number of good flow control frames received from local GBEI management processor.
Total frames received from the local GBEI management processor with a length of less than 64 octets
but with a valid FCS.
Total frames received from the local GBEI management processor with a length of less than 64 octets
and an invalid FCS.
The sum of the lengths of all Ethernet frames transmitted to the local GBEI management processor.
The sum of frames transmitted to the local GBEI management processor that have a unicast
destination MAC address.
The sum of frames transmitted to the local GBEI management processor that have a broadcast
destination MAC address.
The sum of frames transmitted to the local GBEI management processor that have a multicast
destination MAC address.
Learning
(
E)
AutoCx is selected:
(
E)
Description

SWOP (SWitch OPeration)

arrow keys, then press
arrow keys, then press
6–34
Revision 1
MN-CDM710G
.
ENTER
. If Enabled, the Gigabit
ENTER

Advertisement

Table of Contents
loading

Table of Contents