Appendix A Factory Default Settings And Technical Specifications - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

Factory Default Settings and Technical
A.
Specifications
You can restore the wireless controller to its factory default settings on the Reboot/Reset
Controllers screen (see
using the reset button on the rear panel (see
Default Settings
settings shown in the following table.
Table 47. Factory Default Settings
Feature
User login URL
Login User name (case-sensitive)
Login password (case-sensitive)
LAN IP
Subnet mask
Default gateway
LAN
Time zone
Time zone adjusted for daylight
savings time
SNMP
Table 48. Technical and Physical Specifications
Feature
Electrical specifications
Dimensions (W x H x D)
Rebooting or Resetting the Wireless Controller
on page 148). The wireless controller will return to the factory configuration
Appendix A: Factory Default Settings and Technical Specifications
Using the Reset Button to Restore Factory
Default Setting
http:192.168.0.250
admin
password
192.168.0.250
255.255.255.0
192.168.0.1
PST for North America, GMT for other locations
Enabled
Disabled.
Default Setting
100-240V, AC/50-60Hz, Universal Input
DC 5V/8A (internal power supply)
cm: 26.1 x 4.3 x 44
in: 10.3 x 1.7 x 17.3
A
on page 105) or by
| 152