Configuring The License Server Settings - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Configuring the License Server Settings

To configure the license server settings:
1. Select Maintenance > License, and then click the Server Settings tab. The Server
Settings screen displays (see
Figure 76.
2. Configure the settings as explained in
Table 33. License Server Settings
Setting
Server Address
Use a Proxy Server to
Connect to the Internet
This Proxy Server Requires
Authentication
3. Click Apply.
Figure 76).
Table 33.
Description
The IP address or FQDN of the server from which you import your licenses.
Select this check box if you use a proxy server to connect to the Internet.
Proxy Server The IP address or FQDN of the proxy server.
Proxy Port The port through that the proxy server uses
Select this check box if the proxy server requires authentication.
User Name The user name to access the proxy server.
Password The password to access the proxy server.
Chapter 9: Maintaining the Controller | 117