ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Figure 62.
Attach the external storage device to the USB port on the front panel of the wireless
2.
controller.
Click Mount. The storage details become visible on the Extended Storage screen. Before
3.
you remove the external storage device from the USB port, click Unmount.
Managing Remote Access
Enable SNMP to allow SNMP network management software, such as HP OpenView, to
monitor the wireless controller by using SNMPv1 or SNMPv2c protocol.
WIth the exception of the following features, you can configure the wireless controller through
SNMP:
Heat maps
•
Guest access management
•
RF management
•
Stacking management
•
To enable and configure SNMP:
Select Maintenance > Remote Management > SNMP. The SNMP screen displays (see
1.
Figure
63).
Chapter 9: Maintaining the Controller
| 105