Configuring Mac Authentication Settings For Groups - NETGEAR ProSafe WC7520 Reference Manual

Importing a MAC List from a File
You can import a pre-compiled list of approved MAC address from a saved file. This file must
be a simple text file with one MAC address per line.
To import a MAC list from a file:
Create a text file that includes a list of approved MAC addresses. Each MAC address
1.
should be on a separate line with hard returns between lines as shown in the following
example:
00:00:11:11:22:29
00:00:11:11:22:28
00:00:11:11:22:27
00:00:11:11:22:26
00:00:11:11:22:25
Select Configuration > Security > Basic > MAC ACL to go to the MAC Authentication
2.
screen.
Click Browse and select the file containing the list of approved MAC addresses.
3.
If you want to add approved MAC addresses without removing those that are already shown
4.
in this screen, select Merge in the Import MAC list from a file field.
Click Import.
5.
Click Apply so that your changes take effect.
6.

Configuring MAC Authentication Settings for Groups

This lets you block network access privilege of the specified stations through a specific group
of managed wireless access points.
Many networks do not require access point groups. See
Note:
Access Point Groups
access point groups.
92 | Chapter 8: Configuring Security and Wireless Security Profiles
ProSafe 20-AP Wireless Controller WC7520 Reference Manual
in Chapter 6 for more information about
Managing