Auto Copy Start Function - Minolta EP3050 Operator's Manual

Auto Copy Start Function

The auto copy start function allows a copy process to be started as soon as the copier completes
warming up.
Check that the Start Key is lit up green.
1
Load the originals onto the
2
AF-3/AFR-9 or place an original on
the Original Glass.
Press the Start Key.
3
The AF-3/AFR-9 starts feeding the
first original onto the Original Glass
and the message "Copy job will start
after the copier has warmed up."
appears. (Not to mention, the original
manually placed on the Original Glass
remains on the Glass.)
5. Turning ON and OFF, and Resetting the Copier
Do not remove the original until the
copy cycle is completed.
1139O0200A
As soon as the copier completes
4
warming up (which takes about 2
minutes and 30 seconds), the copy
cycle is automatically started.
Note: If the copier has been set into
1139O0210A
1134P342DA
NOTE
the Energy Saver mode, it takes
a maximum 30 seconds for the
copier to complete warming up.
25
1134P342DA