To Set The "Energy Save Mode" Function - Minolta Di2010f User Manual

5.3 Changing Default Settings

To set the "Energy Save Mode" function

This function is used to specify when the machine automatically enters Energy
Saver mode after no operation is performed for the set length of time.
A fax job can even be received while the machine is in Energy Saver mode.
1
Press the [Utility] key.
2
Touch [User Set], and then touch [User's Choice].
3
Touch [3/6], and then touch
[Energy Save Mode].
4
Press the [C] key to erase the
value.
❍
Use the 10-Key Pad to specify
the desired length of time, and
then touch [Enter].
(Specify a length of time
between 1 and 240 minutes.)
5
Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
Di2010f/Di2510f/Di3010f/Di3510f
5
5-15