The Copier Is Not Functioning As Designed; None Of The Control Panel Indicators Light Up; Pressing The Start Key Does Not Start The Copy Cycle; The Copier Is Not Activated When The Power Switch Is - Minolta EP1052 Manual

86

2. The Copier is not functioning as designed

Symptom
None of the Control Panel
Indicators light up.
Pressing the Start Key does
not start the copy cycle.
The Copier is not activated
when the Power Switch is

turned ON.

Turn the copier OFF immediately, unplug the power cord, and call your
Technical Representative.
Check for:
Is the Start Key lit up green?
The copier is in the Auto Shut OFF Mode.
Is the Start Key blinking Orange?
Is any of the following Indicators lit up?
1139O3910A 1139O3270A 1139O3930A
Is the power cord plugged into the power outlet?
Is the room circuit breaker open?
1139O3940A