To Make Automatic Measurements - Agilent Technologies InfiniiVision 3000 User Manual

14
Measurements

To make automatic measurements

1 Press the [Meas] key to display the Measurement Menu.
2 Press the Source softkey to select the channel, running math function,
3 Press the Type: softkey; then, rotate the Entry knob to select a
214
or reference waveform to be measured.
Only channels, math functions, or reference waveforms that are
displayed are available for measurements.
If a portion of the waveform required for a measurement is not
displayed or does not display enough resolution to make the
measurement, the result will display "No Edges", "Clipped", "Low Signal",
"< value", or "> value", or a similar message to indicate that the
measurement may not be reliable.
measurement to be made.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide