Agilent Technologies InfiniiVision 3000 User Manual page 34

1
Getting Started
5. Tools keys
4. Entry knob
3. [Intensity] key
2. Softkeys
1. Power switch
21. Waveform
generator
output
34
6. Trigger controls
20. Digital 19. USB
channel Host
inputs port
1. Power switch Press once to switch power on; press again to switch power off. See
"Power-On the Oscilloscope"
2. Softkeys The functions of these keys change based upon the menus shown on the
display directly above the keys.
The
top of the hierarchy, the
oscilloscope information is shown instead.
3. [Intensity] key Press the key to illuminate it. When illuminated, turn the Entry knob to
adjust waveform intensity.
You can vary the intensity control to bring out signal detail, much like an
analog oscilloscope.
Digital channel waveform intensity is not adjustable.
More details about using the Intensity control to view signal detail are on
"To adjust waveform intensity"
7. Horizontal controls
18. Demo 2, Ground,
and Demo 1
terminals
Back/Up key moves up in the softkey menu hierarchy. At the
Back/Up key turns the menus off, and
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
8. Run Control keys
9. [Default Setup] key
10. [Auto Scale] key
11. Additional
waveform
controls
12. Measure controls
13. Waveform keys
14. File keys
15. [Help] key
17. Analog 16 Vertical controls
channel
inputs
on page 27.
on page 129.