Negative Pulse Count; Rising Edge Count; Falling Edges Count; Mixed Measurements - Agilent Technologies InfiniiVision 3000 User Manual
Infiniivision 3000 x-series
Hide thumbs
Also See for InfiniiVision 3000:
- Programmer's manual (1282 pages) ,
- User manual (440 pages) ,
- Service manual (162 pages)
Table of Contents
Advertisement
This measurement is available for analog channels.
Negative Pulse Count
The Negative Pulse Count measurement is a pulse count for the selected
waveform source.
This measurement is available for analog channels.
Rising Edge Count
The Rising Edge Count measurement is an edge count for the selected
waveform source.
This measurement is available for analog channels.
Falling Edges Count
The Falling Edges Count measurement is an edge count for the selected
waveform source.
This measurement is available for analog channels.
Mixed Measurements
•
Area
Area measures the area between the waveform and the ground level. Area
below the ground level is subtracted from area above the ground level.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Negative pulse count
"Area"
on page 233
14
Measurements
233
Hide quick links:
Advertisement
Table of Contents
