Rise/Fall Time Trigger - Agilent Technologies InfiniiVision 3000 User Manual

6 To set all analog and digital channels to the edge selected by the Slope

Rise/Fall Time Trigger

The Rise/Fall Time trigger looks for a rising or falling transition from one
level to another level in greater than or less than a certain amount of
time.
1 Press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
If all channels in the OR trigger are set to don't care, the oscilloscope
will not trigger.
softkey, press the Set all Edges softkey.
High level
Low level
Rising edge time
to select Rise/Fall Time.
Falling edge time
10
Triggers
155