Agilent Technologies InfiniiVision 3000 User Manual page 314

20
Web Interface
When accessing the password protected oscilloscope, the user name is the
IP address of the oscilloscope.
To reset the
Do one of these things to reset the password:
password
• Using the keys on the front panel of the oscilloscope, press [Utility] > I/O
• Using the web browser select the Configure Network tab, select Modify
314
> LAN Reset.
Configuration, erase the Password, and select Apply Changes.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Enter
password