Agilent Technologies InfiniiVision 3000 User Manual page 154

10
Triggers
1 On the front panel, in the Trigger section, press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey, and use the Entry knob
3 Press the Slope softkey and select rising edge, falling edge, either edge,
4 For each analog or digital channel you want to include in the OR
5 For each channel you select, press the Slope softkey and select
154
to select OR.
or don't care. The selected slope is displayed in the upper- right corner
of the display.
trigger, press the Channel softkey to select the channel.
As you press the Channel softkey (or rotate the Entry knob), the channel
you select is highlighted in the OR = line directly above the softkeys
and in the upper- right corner of the display next to the OR gate
symbol.
Adjust the trigger level for the selected analog channel by turning the
Trigger Level knob. Press the [Digital] key and select Thresholds to set
the threshold level for digital channels. The value of the trigger level or
digital threshold is displayed in the upper- right corner of the display.
(Rising), (Falling),
displayed above the softkeys.
(Either), or X (Don't Care). The selected slope is
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide