I2C/Spi Triggering And Serial Decode; Setup For I2C Signals - Agilent Technologies InfiniiVision 3000 User Manual

I2C/SPI triggering and serial decode requires Option EMBD or the
DSOX3EMBD upgrade.
Only one SPI serial bus can be decoded at a time.
N O T E

Setup for I2C Signals

I
the serial data (SDA) line and the serial clock (SCL) line and then
specifying the input signal threshold voltage levels.
To set up the oscilloscope to capture I
which appears in the Serial Decode Menu:
1 Press [Label] to turn on labels.
2 Press [Serial].
3 Press the Serial softkey, turn the Entry knob to select the desired slot
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
24

I2C/SPI Triggering and Serial Decode

Setup for I2C Signals
I2C Triggering
I2C Serial Decode
Setup for SPI Signals
SPI Triggering
SPI Serial Decode
2
C (Inter- IC bus) signals setup consists of connecting the oscilloscope to
(Serial 1 or Serial 2), and press the softkey again to enable decode.
361
362
366
370
373
375
2
C signals, use the Signals softkey
s1
361