14
Measurements
You can also configure the [Quick Action] key to display the Snapshot All
popup. See
Voltage Measurements
The following figure shows the voltage measurement points.
Measurement units for each input channel can be set to Volts or Amps
using the channel Probe Units softkey. See
page 67.
The units of math waveforms are described in
Waveforms"
•
218
"Configuring the [Quick Action] Key"
Maximum
Amplitude
on page 74.
"Peak- Peak"
on page 219
Peak-Peak
Minimum
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
on page 298.
Top
Base
"To specify the channel units"
"Units for Math
on