Searching For Lin Data In The Lister - Agilent Technologies InfiniiVision 3000 User Manual

22
CAN/LIN Triggering and Serial Decode

Searching for LIN Data in the Lister

The oscilloscope's search capability lets you search for (and mark) certain
types of LIN data in the Lister. You can use the [Navigate] key and
controls to navigate through the marked rows.
1 With LIN selected as the serial decode mode, press [Search].
2 In the Search Menu, press the Search softkey; then, turn the Entry knob
3 Press Search; then, select from these options:
For more information on searching data, see
page 126.
For more information on using the [Navigate] key and controls, see
"Navigating the Time Base"
350
to select the serial slot (Serial 1 or Serial 2) on which the LIN signal is
being decoded.
ID — Finds frames with the specified ID. Press the Frame ID softkey
•
to select the ID.
ID & Data — Finds frames with the specified ID and data. Press the
•
Frame ID softkey to select the ID. Press the Bits softkey to enter the
data value.
Errors — Finds all errors.
•
on page 58.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
"Searching Lister Data" on