Triggers - Agilent Technologies InfiniiVision 3000 User Manual

Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
10

Triggers

Adjusting the Trigger Level
Forcing a Trigger
Edge Trigger
Edge then Edge Trigger
Pulse Width Trigger
Pattern Trigger
OR Trigger
Rise/Fall Time Trigger
Nth Edge Burst Trigger
Runt Trigger
Setup and Hold Trigger
Video Trigger
USB Trigger
Serial Trigger
A trigger setup tells the oscilloscope when to acquire and display data.
For example, you can set up to trigger on the rising edge of the analog
channel 1 input signal.
You can adjust the vertical level used for analog channel edge detection by
turning the Trigger Level knob.
In addition to the edge trigger type, you can also set up triggers on
rise/fall times, Nth edge bursts, patterns, pulse widths, runt pulses, setup
and hold violations, TV signals, USB signals, and serial signals (if option
licenses are installed).
You can use any input channel or the
page 182 BNC as the source for most trigger types.
143
143
144
146
147
150
153
155
156
158
160
161
173
175
"External Trigger Input"
s1
on
141