Agilent Technologies InfiniiVision 3000 User Manual page 240

15
Mask Testing
5 Press Automask.
6 In the Automask Menu, press the Source softkey and ensure the desired
7 Adjust the mask's horizontal tolerance (± Y) and vertical tolerance
8 Press the Create Mask softkey.
240
analog channel is selected.
(± X). These are adjustable in graticule divisions or in absolute units
(volts or seconds), selectable using the Units softkey.
The mask is created and testing begins.
Whenever the Create Mask softkey is pressed the old mask is erased and
a new mask is created.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide