To Specify The Print Options - Agilent Technologies InfiniiVision 3000 User Manual

3 Press the Network Setup softkey.
4 In the Network Printer Setup Menu, press the Modify softkey; then, turn
5 Use the Spell, Enter, and Delete Character softkeys to enter the network
6 Press the Apply softkey to make the printer connection.

To specify the print options

In the Print Configuration Menu, press the Options softkey to change the
following options:
• Setup Information — Select this to print oscilloscope setup information on
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
the Entry knob to select the network parameter you want to enter.
The settings that must be entered are:
Network Domain — this is the Windows network domain name.
•
Username — this is your login name for the Windows network domain.
•
Password — this is your login password for the Windows network
•
domain.
To clear an entered password, press the Clear Password softkey.
Printer Address — this is the server or computer name and the
•
printer's share name in the "\\server\share" format.
The Network Domain, Username, and Password settings are common for all
network printers.
printer settings:
Spell — press this softkey and turn the entry knob to select the
•
character at the current position.
Enter — press this softkey to enter characters and move the cursor to
•
the next character position.
Delete Character — press the Enter softkey until the desired character is
•
highlighted; then, press this softkey to delete the character.
A message appears to tell you whether the connection was successful.
your printout, including vertical, horizontal, trigger, acquisition, math,
and display settings.
18
Print (Screens)
281