Agilent Technologies InfiniiVision 3000 User Manual page 44

1
Getting Started
Analog channel
sensitivity
Status line
Trigger level
Analog
channels
and ground
levels
Digital channels
Measurement
statistics
Menu line
Softkeys
44
Trigger point, Delay
time reference time
Figure 1 Interpreting the oscilloscope display
Status line The top line of the display contains vertical, horizontal, and trigger setup
information.
Display area The display area contains the waveform acquisitions, channel identifiers, and
analog trigger, and ground level indicators. Each analog channel's information
appears in a different color.
Signal detail is displayed using 256 levels of intensity. For more information
about viewing signal detail see
For more information about display modes see
starting on page 129.
Information area The information area normally contains acquisition, analog channel,
automatic measurement, and cursor results.
Menu line This line normally contains menu name or other information associated with
the selected menu.
Time/ Run/Stop
div status
"To adjust waveform intensity"
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Trigger Trigger
type source
Trigger level or
digital threshold
Information area
Cursors defining
measurement
Measurements
on page 129.
Chapter 8, "Display Settings,"