Print (Screens)," Starting On - Agilent Technologies InfiniiVision 3000 User Manual

Once the [Quick Action] key is configured, you simply press it to perform
the selected action.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
• Quick Print — prints the current screen image. Press Settings to set up
the printing options. See
page 279.
• Quick Save — saves the current image, waveform data, or setup. Press
Settings to set up the save options. See
(Setups, Screens, Data)," starting on page 263.
Quick Recall — recalls a setup, mask, or reference waveform. Press
•
Settings to set up the recall options. See
(Setups, Screens, Data)," starting on page 263.
Quick Freeze Display — freezes the display without stopping running
•
acquisitions or un- freezes the display if currently frozen. For more
information, see
Quick Trigger Mode — toggles the trigger mode between Auto and
•
Normal, see "To select the Auto or Normal trigger mode"
page 178.
Quick Clear Display — clears the display, see
•
page 132.
Chapter

18, "Print (Screens)," starting on

"To freeze the display"
Utility Settings
Chapter 17, "Save/Recall
Chapter 17, "Save/Recall
on page 133.
on
"To clear the display"
19
on
299