Current Probes - Agilent Technologies InfiniiVision 3000 User Manual

Table 8 Differential Probes (continued)
Model
N2790A
N2791A
N2792A
N2793A
N2891A
1
See "AutoProbe Interface"

Current Probes

The following current probes can be used with the InfiniiVision
3000 X- Series oscilloscopes.
Table 9 Current Probes
Model
1146A
1147A
N2774A
N2780A
N2781A
N2782A
N2783A
N2893A
1
See "AutoProbe Interface"
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Description
High-voltage differential probe, 50:1 or 500:1 (switchable), 100 MHz with
AutoProbe interface
High-voltage differential probe, 25 MHz, +/-700 V, 1 MOhm termination,
10:1 or 100:1 (switchable)
Differential probe, 200 MHz 10:1, 50 Ohm termination
Differential probe, 800 MHz 10:1, +/-15 V, 50 Ohm termination
70 MHz, 7 kV high-voltage differential probe
on page 318.
Description
Current probe, 100 kHz, 100 A, AC/DC
Current probe, 50 MHz, 15 A, AC/DC with AutoProbe interface
(Obsolete, replaced by N2782A) with N2775A power supply
Current probe, 2 MHz, 500 A, AC/DC (use with N2779A power supply)
Current probe, 10 MHz, 150 A, AC/DC (use with N2779A power supply)
Current probe, 50 MHz, 30 A, AC/DC (use with N2779A power supply)
Current probe, 100 MHz, 30 A, AC/DC (use with N2779A power supply)
Current probe, 100 MHz, 15 A, AC/DC with AutoProbe interface
on page 318.
21
Reference
Quantity
1
Supported
4
Quantity
1
Supported
2
2
321