Acquisition Control; Running, Stopping, And Making Single Acquisitions (Run Control) - Agilent Technologies InfiniiVision 3000 User Manual

This chapter shows how to use the oscilloscope's acquisition and run
controls.

Running, Stopping, and Making Single Acquisitions (Run Control)

There are two front panel keys for starting and stopping the oscilloscope's
acquisition system: [Run/Stop] and [Single].
• When the [Run/Stop] key is green, the oscilloscope is running, that is,
• When the [Run/Stop] key is red, data acquisition is stopped.
• To capture and display a single acquisition (whether the oscilloscope is
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
12

Acquisition Control

Running, Stopping, and Making Single Acquisitions (Run Control)
Overview of Sampling
Selecting the Acquisition Mode
Acquiring to Segmented Memory
acquiring data when trigger conditions are met.
To stop acquiring data, press [Run/Stop]. When stopped, the last
acquired waveform is displayed.
"Stop" is displayed next to the trigger type in the status line at the top
of the display.
To start acquiring data, press [Run/Stop].
running or stopped), press [Single].
The [Single] run control lets you view single- shot events without
subsequent waveform data overwriting the display. Use [Single] when
you want maximum memory depth for pan and zoom.
187
191
197
s1
185
185