Agilent Technologies InfiniiVision 3000 User Manual page 72

4
Math Waveforms
2 If f(t) is not already shown on the Function softkey, press the Function
3 Use the Operator softkey to select an operator or transform.
4 Use the Source 1 softkey to select the analog channel on which to
5 If you select an arithmetic operator, use the Source 2 softkey to select
6 To re- size and re- position the math waveform, see
Math Operating Hints
T I P
If the analog channel or math function is clipped (not fully displayed on screen) the
resulting displayed math function will also be clipped.
Once the function is displayed, the analog channel(s) may be turned off for better viewing
of the math waveform.
The vertical scaling and offset of each math function can be adjusted for ease of viewing
and measurement considerations.
The math function waveform can be measured using [Cursors] and/or [Meas].
72
sofkey and select f(t): Displayed.
For more information on the operators, see:
• "Math Operators"
• "Math Transforms"
• "Math Filters" on page 92
• "Math Visualizations"
perform math. You can rotate the Entry knob or repetitively press the
Source 1 softkey to make your selection. If you choose a transform
function (differentiate, integrate, FFT, or square root) the result is
displayed.
the second source for the arithmetic operation. The result is displayed.
waveform scale and offset"
on page 74
on page 76
on page 94
on page 73.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
"To adjust the math