You can also configure the [Quick Action] key to save setups, screen images,
or data. See
To save setup files
Setup files can be saved to one of 10 internal (\Agilent Flash) locations or
to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
Setup files have the extension SCP. These extensions appear when using
the File Explorer (see
appear when using the Recall Menu.
To save BMP or PNG image files
Image files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
•
Mask (*.msk) — This creates a mask file in an Agilent proprietary
format that can be read by Agilent InfiniiVision oscilloscopes. A mask
data file includes some oscilloscope setup information, but not all
setup information. To save all setup information including the mask
data file, choose "Setup (*.scp)" format instead. See
masks"
on page 271.
Arbitrary Waveform data (*.csv) — This creates a file of comma- separated
•
values for the arbitrary waveform points' time and voltage values. See
"To save arbitrary waveforms"
Power Harmonics data (*.csv) — When the DSOX3PWR power analysis
•
allication is licensed, this creates a file of comma- separated values
for the current harmonics power analysis results. See the DSOX3PWR
Power Measurement Application User's Guide for more information.
"Configuring the [Quick Action] Key"
Setup (*.scp).
navigate to the save location. See
page 272.
A message indicating whether the save was successful is displayed.
8-bit Bitmap image (*.bmp), 24-bit Bitmap image (*.bmp), or 24-bit image (*.png).
Save/Recall (Setups, Screens, Data)
on page 272.
"To navigate storage locations"
"File Explorer"
on page 287), but they do not
"To save
on page 298.
on
17
265