Learn The Oscilloscope Display - Agilent Technologies InfiniiVision 3000 User Manual

4.
5.
6.
7.
8.

Learn the Oscilloscope Display

The oscilloscope display contains acquired waveforms, setup information,
measurement results, and the softkey definitions.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
TRIG OUT Trigger output BNC connector. See
connector Source"
Calibration See "To perform user calibration"
protect button
EXT TRIG IN External trigger input BNC connector. See
connector page 182 for an explanation of this feature.
USB Host port This port functions identically to the USB host port on the front panel.
USB Host Port is used for saving data from the oscilloscope and loading
software updates. See also USB Host port (see
USB Device This port is for connecting the oscilloscope to a host PC. You can issue
port remote commands from a host PC to the oscilloscope via the USB device
port. See
on page 292.
on page 294.
"Remote Programming with Agilent IO Libraries"
Getting Started
"Setting the Rear Panel TRIG OUT
"External Trigger Input"
page 40).
on page 307.
1
on
43