Interpreting I2S Lister Data; Searching For I2S Data In The Lister - Agilent Technologies InfiniiVision 3000 User Manual

When the receiver word size is greater than the transmit word size, the decoder fills the
N O T E
least significant bits with zeros and the decoded value does not match the trigger value.

Interpreting I2S Lister Data

In addition to the standard Time column, the I2S Lister contains these
columns:
• Left Channel — displays the left channel data.
• Right Channel — displays the right channel data.
• Errors — highlighted in red and marked with an "X".
Aliased data is highlighted in pink. When this happens, decrease the
horizontal time/div setting and run again.

Searching for I2S Data in the Lister

The oscilloscope's search capability lets you search for (and mark) certain
types of I2S data in the Lister. You can use the [Navigate] key and controls
to navigate through the marked rows.
1 With I2S selected as the serial decode mode, press [Search].
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
I2S Triggering and Serial Decode
25
389