Agilent Technologies InfiniiVision 3000 User Manual page 254

16
Waveform Generator
Waveform Characteristics
Type
Cardiac Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude, and Offset
softkeys to set the cardiac signal parameters.
Gaussian Use the Frequency/Frequency
Pulse Fine/Period/Period Fine, Amplitude, and Offset
softkeys to set the gaussian pulse signal
parameters.
1
When the output load is 50 , these values are halved.
The Settings softkey opens the Waveform Generator Settings Menu which
lets you make other settings related to the waveform generator.
See:
•
•
•
•
•
254
Pressing a signal parameter softkey can open a menu for selecting the
type of adjustment. For example, you can choose to enter amplitude
and offset values, or you can choose to enter high- level and low- level
values. Or, you can choose to enter frequency values or period values.
Keep pressing the softkey to select the type of adjustment. Turn the
Entry knob to adjust the value.
Notice that you can select between coarse and fine adjustments for
frequency, period, and width. Also, pushing the Entry knob is a quick
way to toggle between coarse and fine adjustments.
"To output the waveform generator sync pulse"
"To specify the expected output load"
"To use waveform generator logic presets"
"To add noise to the waveform generator output"
"To restore waveform generator defaults"
Frequency
Range
100 mHz to
200 kHz
100 mHz to
5 MHz
on page 259
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Max. Offset
Amplitude (High-Z)
1
(High-Z)
20 mVpp to ±1.25 V
5 Vpp
20 mVpp to ±1.25 V
4 Vpp
on page 259
on page 260
on page 261
on page 261
1