Position; Groups; Aux Send - Tascam SX-1 Reference Manual

Part IV–Mixer Controls
CUE Press this key to assign the selected channel to
the Cue buss.
L/R Press this key to send the selected channel to the
master stereo buss out.
LINK The key allows the selected channel to be
LINK
ganged with an adjacent channel (the next even chan-
nel if the selected channel is odd, and the previous
odd channel if the selected channel is even) for stereo
operation. Right-click on the key and select which
functions are linked (aux send, dynamics, EQ, faders,
trim/delay, stereo pan, and cue pan).
FX INSERT Use this key to enable or disable one of
the SX-1's eight inserts. Right-click on the key's
arrow to select or configure an insert source.
Main This onscreen fader mirrors the selected chan-
nel's physical fader.
Cue This onscreen fader mirrors the selected chan-
nel's physical fader for its cue level.
TIP
Exact numerical values can be entered directly into the
text field above the and
Main
the field to highlight the text, then enter a value using
the PS/2 keyboard's number keys and press "enter" to
set the value.
The

POSITION

POSITION
channel's position in the stereo (or surround) field.
Phase This button reverses the selected channel's
phase by 180º.
Trim dB Use this fader to trim the selected channel's
audio ±20dB.
Delay Samples Use this fader to delay the selected
channel's audio by a set number of samples (up to
8191 samples).
48
TASCAM SX-1 Reference Manual
faders. Click once in
Cue
module determines the
Pan This fader mirrors the selected channel's physi-
cal pan pot.
Cue Pan This fader mirrors the selected channel's
Cue mix pan pot.
The module gives you direct

GROUPS

GROUPS
access to the selected channel's associated fader
groups.
Master This window displays the master fader asso-
ciated with the selected channel.
Add Press the key (under either the
windows) to add a fader to its associated group.
Slaves
DISSOLVE Dissolves the group when the Master
channel is selected.
Slaves This window displays the slave faders associ-
ated with the selected channel and its Master fader.
The

AUX SEND

AUX SEND
for all six of the channel's aux sends.
Keys 1 to 6 These keys enable or disable, the
selected channel's aux sends.
PRE/POST The keys select whether their
PRE/POST
associated aux sends will operate before (pre) or after
(post) the selected mixer channel's fader level.
Faders These faders mirror the Virtual Channel's
Aux Send pots and the
Mixer
or the
Master
module houses controls
screen's Aux faders.