Lcd External Devices Settings Screen - Tascam SX-1 Reference Manual

LCD EXTERNAL DEVICES Settings Screen

Use this screen to manage the SX-1's transport com-
munication with external devices. See "P2 Remote
Machine Control in the SX-1" on page 34 for more
details..
From the section, press
LCD ACCESS
, then press the
TRANSPORT
key to reach this screen.
Part VIII–Data Entry, System & File Management
soft
EXTERNAL DEVICES
Selects the SX-1's time code
CHASE MODE
source. You should use
Internal
chronized to external timecode. You should use
the SX-1 is synchronized to external timecode. Use
if the SX-1 is synchronized to MIDI Time Code
MTC
coming in its MTC port. If the time code Source is
either or , the transport will automatically
MTC LTC
locate and begin playing when the SX-1 receives
incoming time code. See "Working with External
Timecode Sources" on page 35 for more details of
these operations.
This is where you choose the time
INT TC Rate
code (SMPTE/EBU) frame rate that the SX-1 will
use and output.
There is no industry standard
WORD IN SETUP
for word clock polarity; this field lets you choose to
use the rising edge of the word stream or the falling
edge when syncing to external word.
Determines whether the SX-
WORD OUT SETUP
1 outputs word clock that is referenced to the rising
edge or falling edge of its own clock reference.
TASCAM SX-1 Reference Manual
if the SX-1 is not syn-
if
LTC
189